The best solution for Cool rooms & sealed metal areas.

Radio waves won’t go through metal, so sealed metal environments such as cool rooms and shipping containers often completely block the signal for internal loggers.

This logger has a temperature sensor on the end of a probe wire. The probe can be inside the metal box and the logger outside, so the signal is not obstructed.

Can also be used to log liquid temperatures. Range is slightly larger than the internal sensor model at -40°C to 80°C with an accuracy of ± 0.3°C.

Description

Monitor temperatures in hard to reach places.

Ideal for cool rooms
It can be tough to get a temperature signal out of a good commercial cool room or freezer. This logger can sit outside the cool room as it has a probe that can be installed inside.

Is this logger right for you?
For Clever Logger to work properly, you must be able to get a radio signal from the logger to the gateway.

But if the logger is inside a big metal box, like a commercial walk-in cool room, it can be almost impossible to get the signal out.

That’s where these loggers are great. You drill a hole through the cool room wall and pass the probe through, then seal the hole. The transmitting part of the logger is now outside the box and able to send data to the gateway.

Ideal for:

• Cool rooms and freezers in restaurants, supermarkets and food manufacturers
• Liquids

  • Cooling towers
  • Aquariums