Brand: FSTEST

CatNO: BT32.4161.5

Specifications: 10 Tests/Kit

Shelf life: 12 months

Application: Rapid detection of vomitoxin in grain.

Product Description:

Vomitoxin, also known as deoxynivalenol (DON), is a toxic metabolite produced by Fusarium. It is mainly found in wheat, barley, corn and other grain seeds. It is one of the most seriously polluted mycotoxins. Humans and animals have extensive toxic effects after ingesting grains contaminated by toxins, which can cause vomiting, food refusal, weight loss , and damage the immune system and hematopoietic system. FSTest vomitoxin Rapid Test Kit is based on immunochromatographic assay. The test cassette has a testing window for the observation of assay running and result reading. The testing window has an invisible T (test) zone and a C (control) zone before running the assay. When the treated sample was applied into the sample hole on the device, the liquid will laterally flow through the surface of the test strip and react with the pre-coated recombinant antigens. If there are vomitoxin in the sample, The appear of T line will be inhibited in the relative window. The C line should always appear after a sample is applied, which indicates a valid result. By this means, the device can indicate the presence of vomitoxin in the sample.

Specifications:

Brand: FSTest Quantity: 10 tests/kit Shelf life: 12 months

Application:

Rapid detection of vomitoxin in grain.

Limit of Detection:

1mg/kg, 1ppm

Content:

Test cassette ×10 Extract solution ×1 Diluent solution ×1 2mL centrifuge tubes ×10 10mL centrifuge tubes ×10

Sample Prepare:

1.Grind the sample into powder. 2.Weigh 1.0±0.05g into 10mL centrifuge tube. 3.Add 5mL extract solution, Shake for 3 minutes to mix, then centrifuge at 4000 rpm for 3 minutes(or static settlement). 4.Pipette 50uL of supernatant into a 2mL centrifuge tube, add diluent according to the table below, shake to mix.

Testing steps:

1.Restore the test cassette and sample to room temperature (20~40℃). 2.Take out test cassette from bag, place it flat. 3.Pipette 100μL sample into the cassette hole 4.Interpreted test results in 8-10 mins, results is invalid after 10 mins.